Sudo apt-key adv -keyserver -recv-keys 736E4F0B To do so, execute the following: sudo add-apt-repository 'deb vivid main'

On Ubuntu 15.10/16.04 and Linux Mint 18, you can still use the QtSixA PPA, but specifying 'vivid' as the Ubuntu version (15.04), since that was the last officially supported version.

Go to the Bluetooth settings, select your device, and disconnect it with the toggle.

Maintain L2, R2 and the PlayStation button pressed for 10 seconds or.

There are 2 options to turn off the controller: If you want to re-associate it, you will need to connect it via cable first, like you did with your PC. Note that this will dissociate the controller from your PlayStation (otherwise it would still turn it on when you press the PlayStation button).

Accept the confirmation dialog that opens:įrom now on, you just have to press the PlayStation button to connect it via Bluetooth to your PC.

Ensure Bluetooth is enabled, and keep that window open.

Open Bluetooth settings in the Gnome Control Center.

If you controller is connected over USB, disconnect it first.

To avoid this, you need to pair the controller via Bluetooth. The main drawback is that the controller remains paired with your PlayStation, so when you disconnect the controller, it turns on the PlayStation. If you want to use it also via Bluetooth, prefer to make the Bluetooth setup first.Ĭonnecting the controller via USB just works™ out of the box. There is nothing to install anymore on recent versions of Ubuntu, as Dualshock 3 (and 4 I believe) is natively supported by the Kernel, in both USB and Bluetooth. You can test the functionality of your controller through Jstest-gtk (install: sudo apt-get install jstest-gtk)

If you press the Playstation button, the computer will receive its input and simulate it as an Xbox 360 controller, which should work the same as the playstation controller.

start xboxdrv with sudo xboxdrv -detach-kernel-driver.

install xboxdrv from the Ubuntu Software Center or with sudo apt-get install xboxdrv.

If it does not work automatically, this link might answer your question. I use another similar PnP controller, and it works without difficulty.

It might be that the controller already works if you do this (You can test this with jstest-gtk as listed below). I don't know how to connect the controller via bluetooth to your computer (if you even have a bluetooth receiver), so this answer focusses on usb connection. This is supplied with a PS3 device (it is the primary way to charge the controller). You are able to connect the controller to the pc via usb cable.

How to use a ps3 controller on mac